Requirements
*A working pc
*Adb and fastboot drivers
*Qpst/qfil
*Twrp advanced
*Magisk installer
*No verity encryption zip
Now follow the steps in the listed order
Step 1: Download and extract qpst from the link provided below, included in the zip file are drivers that should be installed first before qpst tool
Step 2: Install all drivers in drivers folder and and those in tools folder(vcredist_x86 then the setup for visual c++ runtime in that order)
Step 5: Search for Qfil and run app
Step 6: Set build type to flat build
Step 7: Navigate to programmer path and click browse, locate your extracted twrp folder and select prog_emmc_firehose_652.mbn
Included in zip is an EDL script,
Step 10: Now connect your device to your pc to boot into EDL mode( device should be on) run the edl script provided in the twrp advanced zip you have downloaded, NOTE: This step requires adb so adb should be working properly on your pc. Grant usb debugging request that pops up on your device screen
Second method to boot into EDL mode: Make sure your device is powered off completely. Hold both volume buttons( vol+ and vol -) until Qfil detects your phone as QUALCOMM HS-USB QDLOADER 9008. When your device red light starts blinking then you should know you have successfully entered EDL
Now click the DOWNLOAD button on Qfil and wait for the flash to be successful. After flash has completed boot into twrp by holding the power and the vol+ keys together.
Important step: When on twrp, navigate to the install tab and locate magisk zip, flash magisk after flashing is successful, flash Noverity zip( This prevents device from being stuck at coolpad logo)
Now reboot your device!
Have any issues or questions? Leave a reply!
Required files ----- DOWNLOAD HERE
EmoticonEmoticon